49 years of welding, engineering and construction experience
onsite mobile welder.
Solving all your
Specialist aluminium welder
I very seldom go out to a client to look at their welding requirements.
My approach to work is
"nothing is a problem"
Pictures showing aluminium bike frame welding repairs to World Champion Charlie Rolls trial bikes. Charlie happens to live 2 villages away from me.
Picture showing a crack in the weak spot on the aluminium frame.
Picture showing the area cleaned up and partly welded
Picture shows the completed aluminium welding repair plus the strengthening of the weak area.
Notice how the weak area where the crack used to be has been built up. Tapering it down to meet the frame, preventing any further cracks in this area.
The opposte side was also strengthened as a precautionary measure.
This swing arm came in broken off completely.
A bit of a challenge aligning it up accurately
Came up with an alignment plan which worked like a dream
Aluminium frame welding repair turned out perfect.
Another happy customer!
This is a Scott, Off-Road bicycle swing arm, showing the repairs done to the cracked aluminium frame area.
Cracked swing-arm aluminium welding repair
Repair ends up stronger than before
My approach to welding/repairing a crack in a frame is to ensure the weld/repair is stronger than before. The weld will normally occur in a weak spot on the frame. By building up the frame using an aluminium TIG welder I carefully build up the damaged area with an additional layer of aluminium material, ensuring sufficient strength to withstand future punishment in the same area.
Cost of aluminium welding repairs
To get a quote, send me a photo and your post code and I will get back to you ASAP
I cannot guarantee a successful weld. Every type of aluminium product is different, which means different results.
I cannot be held liable in the event of there being damage caused to your item through the welding repair process.
I can also not be held liable in the unfortunate event of a breakage occurring to your item causing damage or harm to anyone or anything else due to structural or weld failure.
Aluminium welding temperature reaches 660oC, so all paint work will be destroyed around the welded area in the process. There may also be damage caused to seals or other components due to the excessive heat from the weld.
Aluminium Bicycle Frame Welding Repairs
Onsite mobile aluminium welder,
London, Cambridgeshire and surrounding areas
I offer a mobile on-site welding service in Cambridge - London and surrounding areas. I have worked as a sub contractor for numerous construction companies in and around London and Cambridgeshire areas.
Experienced, proficient on site mobile welder. I have over 34 years of welding experience (I started back in 1972 at technical college learning the basics of arc welding) working on construction sites erecting/welding steel structures, to basic welding work. I have all the latest inverter technology welding equipment from MIG and TIG welders to arc/stick welder (dual voltage 110 - 240 volt machines to comply with health and safety regulations on building sites) to oxy acetylene cutting torch. I also have a current IPAF or PAL - Powered Access License. Types; 3a 3b. (Cherry picker operator license.) I have full public liability insurance cover. See proof and details of cover below. I am based just outside Cambridge but work mostly in London. I cover other surrounding locations within an 80 mile radius from Cambridge.
34 years of welding, engineering and construction experience
Reliable and friendly, mobile onsite coded welding services
in Cambridge and London surrounding areas
I cover a wide range working within an 80 mile radius of Cambridge offering my mobile onsite coded welding services in areas such as Cambridgeshire to Hertfordshire, Bedfordshire and in towns/cities such as Cambridge to Huntingdon, Royston, Bury St Edmunds, Bedford, Peterborough, Milton Keynes, St Noets, St Ives, Stevenage, St Albans, Luton, London, South London, Staines, Ipswich, Norwich and numerous others not mentioned.
MIG, TIG and Arc/MMA welding, Stick welding -
mobile on site welder service
Oxy acetylene cutting services in Cambridge
Plasma Cutting Services in Cambridge, London and surrounding areas
Contact: Deon van Rooyen
Tel: 0333 666 3213
Mob: 07745 775 212
Prompt, Accurate, Affordable & Friendly Welding Service
Operating in Cambridge, London, plus outlying areas
Higos Insurance Services Ltd - Public Liability Insurance
Public Liability : £2,000,000
Insurance cover under -
Deon van Rooyen t/a
All Metal Welding Services
We have full public liability insurance cover
The importance of using a company with the correct insurance cover.
Policy no. 10771543
I have worked closely with Durkan Construction site managers on various construction sites in and around London solving a wide range of problems. Because of my extensive engineering background over the years I apply my experience in the construction industry to solve various problems.
All forms of metal work, welding and engineering undertaken
Our company is based in Cambridge but the majority of our work is undertaken in and around London.
All our welding equipment items are dual voltage 110 - 240v to comply with construction site health and safety regulations and standards.
This is one of our light weight, dual voltage, latest inverter technology TIG welding machines to weld thin steel, aluminium and stainless steel as-well-as TIG brasing.
Using the correct machine for each welding application
We carry 3 different types of dual voltage welding machines with us at all times, including a portable welder/generator in the event of not having electricity on site.
- MIG welding machine
- TIG welding machine
- Stick/ARC/MMA welding machine
Oxy acetylene cutting
The reason for having a variety of machines available is to achieve the best results. Each welding application is different and requires a different approach/welding machine and technique to solve the problem.